BackgroundThis task allows girlfriend to practice a selection of skills including configuring VLANs, PPP through CHAP, static and also default routing, using IPv4 and IPv6. As result of the sheer number of graded elements, you have the right to click inspect Results and Assessment items to check out if friend correctly gone into a graded command. Usage the cisco and also class passwords to access privileged EXEC settings of the CLI for routers and also switches.RequirementsAddressing· The addressing scheme supplies the 192.168.1.0/24 deal with space. Added address an are is obtainable between VLAN 15 and VLAN 1. VLAN 25 needs sufficient addresses because that 50 hosts. Determine the subnet and complete the subnet table below.


You are watching: Packet tracer skills integration challenge answers

*

· complete the Addressing Table by assigning the complying with addresses to VLAN 25:o R2 G0/0.25 - first IPv4 addresso PC25 - second IPv4 addresso L25 - critical IPv4 address· Configure IPv4 addressing top top the necessary finish devices.· top top R2, create and also apply IPv4 and IPv6 addressing to the G0/0.25 subinterface.VLANs· on S1, produce VLAN 86 and also name it BlackHole.· Configure S1 harbor in static mode with the complying with requirements:o F0/1 is the native trunk because that VLAN 99.o F0/7 - F0/18 as access ports in VLAN 15.o F0/19 - F0/24 as access ports in VLAN 25.o G0/1 - 2 and also F0/2 - F0/6 space unused. They have to be appropriately secured and also assigned come the BlackHole VLAN.· top top R2, configure inter-VLAN routing. VLAN 99 is the aboriginal VLAN.PPP· Configure R1 and also R2 to usage PPP through CHAP for the shared link. The password for CHAP is cisco.Routing· top top R1, configure IPv4 and also IPv6 default routes using the appropriate exit interface.· on R2, configure one IPv6 default course using the suitable exit interface.· Configure IPv4 OSPF making use of the adhering to requirements:o Use process ID 1.o Routers R1 and R2 space in area 0.o R1 offers router i would 1.1.1.1.o R2 provides router id 2.2.2.2.o Advertise details subnets.o ~ above R1, propagate the IPv4 default course created.· Configure IPv6 OSPF utilizing the following requirements:o Use procedure ID 1.o Routers R1 and R2 are in area 0.o Configure OSPF on suitable interfaces on R1 and R2.o R1 offers router i would 1.1.1.1.o R2 offers router id 2.2.2.2.Connectivity· All gadgets should be able to ping the web server.


See more: What Does Cl Stand For In Measurement ? What Does Cl Mean In Measurement

*