Drive Belt Tensioner Replacement Service

How much does a Drive Belt Tensioner Replacement cost?

On average, the cost for a Chrysler Town & Country Drive Belt Tensioner Replacement is $158 with $64 for parts and $95 for labor. Prices may vary depending on your location.

You are watching: How to replace serpentine belt on chrysler town and country


CarServiceEstimateShop/Dealer Price
2013 Chrysler Town & CountryV6-3.6LService typeDrive Belt Tensioner ReplacementEstimate$474.55Shop/Dealer Price$574.44 - $851.61
2009 Chrysler Town & CountryV6-3.3LService typeDrive Belt Tensioner ReplacementEstimate$284.45Shop/Dealer Price$341.83 - $491.44
1987 Chrysler Town & CountryL4-2.5LService typeDrive Belt Tensioner ReplacementEstimate$352.19Shop/Dealer Price$426.51 - $626.92
1987 Chrysler Town & CountryL4-2.2L TurboService typeDrive Belt Tensioner ReplacementEstimate$379.07Shop/Dealer Price$460.09 - $680.64
2010 Chrysler Town & CountryV6-4.0LService typeDrive Belt Tensioner ReplacementEstimate$315.75Shop/Dealer Price$380.97 - $554.07
2008 Chrysler Town & CountryV6-4.0LService typeDrive Belt Tensioner ReplacementEstimate$315.75Shop/Dealer Price$380.96 - $554.04
1996 Chrysler Town & CountryV6-3.8LService typeDrive Belt Tensioner ReplacementEstimate$226.99Shop/Dealer Price$268.62 - $371.28
2009 Chrysler Town & CountryV6-3.8LService typeDrive Belt Tensioner ReplacementEstimate$289.45Shop/Dealer Price$347.07 - $496.86

What is the Drive Belt Tensioner all about?

A Drive Belt Tensioner is a pulley mounted to either a spring mechanism or to an adjustable pivot point that is used to keep constant tension on your serpentine belt. That is the big long belt in the front of your engine.

The tensioner rides on the outside surface of the belt to put pressure, or tension, on the belt and against the pulleys that drive things like the alternator, power steering, air conditioner, etc.


Keep in mind:

Tensioners usually come with pulleys; they are normally replaced together. Also, when replacing a tensioner, the drive belt usually must be removed. A mechanic may recommend replacing the belt as well.


How it"s done:

Check for any noise in the engine (usually a squeaky or grinding noise).Remove the drive belt(s) (in most cases).Inspect drive belt pulleys.Check the drive belt tensioner.Remove and replace the tensioner if faulty.Start car to see if noise is gone.

See more: How Many Wheels Are On A School Bus ? Guide To School Bus Tire Maintenance


Our recommendation:

Your drive belt tensioner should always be inspected when your drive belt is serviced. During routine maintenance and inspection, your drive belt system should be reviewed to make sure that all the components are in working order. The drive belt tensioner will usually last longer than the drive belts, so as long as your tensioner is inspected or replaced when your drive belts are, your belt system should remain in good shape.


What common symptoms indicate you may need to replace the Drive Belt Tensioner?

Unusual noise (squeaky or grinding sound) every time you start the engine.


How important is this service?

The air conditioning, power steering, and alternator in your vehicle are given power through the drive belt. The belt is attached to both the crankshaft and these systems, and transfers power from the engine to drive each of these components. The drive belt tensioner is responsible for keeping the tension in the drive belt, which allows it to continue moving and transferring power. When the drive belt tensioner fails, the tension in the drive belt will begin to diminish, and the vehicle will not operate as well.