Despite the Accord"s dramatically high rank on the most stolen dare list, one additional annoyance is a malfunctioning manufacturing facility security system. Learn exactly how to disable the security device with this how-to.


This article applies to the Honda Accord (1990-2002).

You are watching: How to disable car alarm honda accord

Despite Honda"s call for reliability, specific Honda Accord models additionally have a tendency to suffer security device malfunctions. This can be quite problematic once the alert randomly goes off at four in the morning, waking up your family and your neighbors. Fortunately, you can readjust the sensitivity or disable the factory security device yourself, and also put a stop to the continuous racket. If you"re uncomfortable playing through wires, find a trusted shop that can get the job done, but likewise expect to salary a quite penny. Here"s a DIY overview to successfully disable her alarm.


Adjusting the Sensitivity

Step 1 – readjust the settings

If friend don"t want to totally disable the defense system, friend can readjust the system with a flat head screwdriver. Under the driver"s next dashboard is a regulate unit for the security system. Over there you have the right to lower the sensitivity by adjusting the knob come your desired setting. Carry out not collection the sensitivity also low or the alarm may not activate in ~ all—even if the glass breaks.

*
Figure 1. Chart of the Honda Accord"s defense system manage box.

Disabling the factory Security System

Step 1 – Disconnect the cable harness

To completely disable the manufacturing facility security system, just disconnect the harness that powers it. A green, two-pin plug is situated by the hood latch, and also it is attached come the grille by 6 screws. Traction the latch top top the plug and slide the two-wire bundle out.

*
Figure 2. A two-pin connector because that the Honda Accord"s defense system.Step 2 – Shorten the two-pin wire harness

Strip the rubber or plastic insulators native both ends of the wire, and then press each end into the female slot of the cable harness. Usage a plastic zip tie to close the connector come the structure or fully remove the connector by removed the six screws holding the in place.

See more: Can You Move Out Of State While On Probation ? Moving Out Of State While On Probation

*
Figure 3. A thin piece of wire can be supplied to shorten the two-pin cable harness.

Featured Video: how to Disable the manufacturing facility Alarm