You are watching: Can you paint over thompsons water seal
I live in Pennsylvania and also built a new deck using pressure treated lumber. I stained the totality deck v Thompson"s Water Seal semi-Transparent backwoods cedar last summer. Have the right to I paint over the waterproofing stain? If not what would I need to do for this reason I can paint the deck and have the paint hold and last? Water doesn"t bead up and it"s no as slippery when wet choose it did when I an initial applied the stain.
Thompson"s is absolute garbage. Press washing will take turn off what tiny of the coating that is still present. Then apply a real product.......Cabot, Sikkens, SW Deckscapes, etc. Execute NOT use PAINT come A DECK!More advice and aid here:www.deckstainhelp.com
You should use a cleaner and also pressure wash it getting the angles and also gaps, etc. Rinse. Let dry. Sand surface with 80 grit paper on an orbit sander, hooked as much as a shopvac or dust extractor. Because that the deck surface I would obtain it sanded 90% clean or better. Handsand pickets or use a $30 skil "octo" sander to with all the stuff.Most important, perform you desire solid color or transparent stained look?For hard color, find and also buy Proluxe Rubbol Solid color stain, and use a 6" stainer brush come apply and brush the end 2 coats. This hard opaque shade will have actually a short sheen come it.For transparent there room a few good brands and also products.
Does the TWS still bead water? the is the true test regarding how fine it will certainly accept a new stain. Ns agree there room a lot better stains available! Paint can initially last much longer than a deck stain but adds too much prep job-related when it come time come repaint.I generally just usage a bleach solution and a push washer to obtain a deck
You should use a cleaner and pressure wash it acquiring the angles and gaps, etc. Rinse. Let dry. Sand surface with 80 grit document on an orbit sander, hooked approximately a shopvac or dust extractor. Because that the deck surface I would obtain it sanded 90% clean or better. Handsand pickets or use a $30 skil "octo" sander to reach all that stuff.Most important, execute you want solid color or transparent stained look?For heavy color, find and buy Proluxe Rubbol Solid color stain, and use a 6" stainer brush to apply and brush the end 2 coats. This solid opaque color will have actually a low sheen come it.For transparent there space a few good brands and products.
See more: Convert 32 Cups Is How Many Gallons Converter, Convert 32 Cups To Gallons
Hey man, nothing against sanding decks down or anything, however you"re acting prefer its a important step, once its not, specifically if they can be law a solid color stain. Im sure it looks a little far better if you perform sand everything down, but this is a DIY forum, and people right here are most likely to not want to spend all the extra time and also money just to make it look at a tiny better. With a an excellent pressure wash, and also maybe some hardwood brightner, most decks will certainly look quite close to new after a fresh stain. The general rule is, if they want a lighter color stain, strip it, if that the same shade or darker, dont. Just make the clear to people when you give advice, cuz they could end up thinking that if they not sand it, the stain no stick or something. Im sure your decks come the end looking a little better than mine, however Im okay v it feather 95% new if it conserves me 2 days worth of work, and the clienta thousands or so bucks. I would at the very least give people an option.